PadlockPay securely withVisaMastercard

Superpro Ezy lifts

Superpro Ezy lifts

Want a Suspension Lift on your new 4WD Ute without the Price Tag? SuperPro Roll Control Eazy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Ute and retain the standard suspension. Each kit has been thoroughly tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension. Everything that is required has been supplied in each Kit, including comprehensive fitting instructions to ensure the right outcome every time.

Items 1 to 12 of 17 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  • Ford Ranger PX (T6) 2011-on Front & Rear SuperPro Easy-Lift Kit TRC168lk

    Ford Ranger PX (T6) 2011-on / Mazda BT-50 B22, B32 - 2011-on

    Front & Rear SuperPro Easy-Lift Kit

    This kit will lift the vehicle approx. 45mm and retains the standard suspension.

    Kit contains:

    2 Front Strut Spacers
    2 Rear Raising Blocks
    4 U Bolts.
    To be used with standard height suspension only.

    Strongly recommend to fit longer travel shock absorbers on the rear.

    Want a Suspension Lift on your new 4WD Ute without the Price Tag?

    SuperPro Roll Control Ezy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Ute and retain the standard suspension.
    Each kit has been maliciously tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension.
    Everything that is required has been supplied in each Kit, including comprehensive fitting instructions to ensure the right outcome every time.
    Ford Ranger PX (T6) 2011-on Front & Rear SuperPro Easy-Lift Kit TRC168lk
    $275.00
  • Toyota Hilux GGN GUN N80 2015 on SuperPro Easy-Lift Kit

    This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts.

    Vehicle Application Information:

    To be used with standard height suspension only

    SuperPro Roll Control Ezy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Ute and retain the standard suspension. Each kit has been tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension.
    Everything that is required has been supplied in each Kit, including comprehensive fitting instructions to ensure the right outcome every time.
    Toyota Hilux GGN GUN N80 2015 on SuperPro Easy-Lift Kit
    $295.00
  • Mitsubishi Triton MQ Front & Rear SuperPro Easy-Lift Kit TRC218lk

    SuperPro Easy-Lift Kit

    This kit will lift the vehicle approx. 25mm and retains the standard suspension. Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts.
    Vehicle Application Information:
    To be used with standard suspension only.
    SuperPro Roll Control Ezy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Ute and retain the standard suspension. 
    Each kit has been tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension.
    Everything that is required has been supplied in each Kit, including comprehensive fitting instructions to ensure the right outcome every time.
    Kit contains:

    2 Front Strut Spacers
    2 Rear Raising Blocks
    4 U Bolts
    Hand Brake Bracket Mount Extension Kit
    To be used with standard height suspension only.

    Strongly recommend to fit longer travel shock absorbers on the rear.

    Want a Suspension Lift on your new 4WD Ute without the Price Tag?


    The Legislation says...Yes, our spacer lift kits are legal

    The following only applies if our Ezy-Lift kits are fitted correctly to vehicles with standard suspension (following all instructions included in the kit).



    Mitsubishi Triton MQ Front & Rear SuperPro Easy-Lift Kit TRC218lk
    $235.00
  • Mazda BT-50 Gen 2 2011-on SuperPro Easy-Lift Rear Lift Kit

    SuperPro Easy-Lift Rear Lift Kit
    This Kit is a safe, legal alternative to Extended Shackles.
    To be used with standard height suspension only.
    This kit will lift the vehicle approx. 45mm and retains the standard suspension.
    Mazda BT-50 Gen 2 2011-on SuperPro Easy-Lift Rear Lift Kit
    $185.00
  • Isuzu Dmax Front & Rear SuperPro Easy-Lift Kit TRC185lk


    This kit will lift the vehicle approx. 45mm and retains the standard suspension.

    Kit contains:
    2 Front Strut Spacers
    2 Rear Raising Blocks
    4 U Bolts
    Hand Brake Bracket Mount Extension Kit
    To be used with standard height suspension only.

    Strongly recommend to fit longer travel shock absorbers on the rear.

    Want a Suspension Lift on your new 4WD Ute without the Price Tag?

    SuperPro Roll Control Ezy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Ute and retain the standard suspension.
    Each kit has been maliciously tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension.
    Everything that is required has been supplied in each Kit, including comprehensive fitting instructions to ensure the right outcome every time.




    The Legislation says...Yes, our spacer lift kits are legal

    The following only applies if our Ezy-Lift kits are fitted correctly to vehicles with standard suspension (following all instructions included in the kit).



    VSB14 - Vehicle Standards Bulletin 14 - [LINK]

    The controlling set of standards for vehicle modification is VSB14 , in particular for us, Section LS Tyres, Suspension & Steering Modifications.

    The Ezy-Lift kits fall into the category of Basic Modifications without Certification.

    Everything about our lift kits meet the criteria set down in this document.

    Suspension modification, (50mm maximum if no other modifications resulting in a change of vehicle height are performed.

    - Our Ezy Lift Kits do not exceed 50mm lift.

    When raising a vehicle at least two thirds of the original rebound travel must be maintained. The rebound must be limited by the same method as originally employed by the manufacturer. For example limit straps or shock absorber full extension.

    - Each Ezy Lift kit is specifically designed for each application and the lift is different across all applications to comply with this rule with the use of Blocks and Strut Spacers.
    Blocks used with leaf spring suspensions must be steel, aluminium or metal of equivalent strength and must be positively located to the axle spigot hole and spring centre-bolt.

    - Ezy Lift Kits are Aluminium construction with Steel spigots.
    Following the completion of modifications the vehicle attitude must remain as per original specifications – i.e. the original relationship between the front and rear suspension heights must not be changed and therefore the front and rear suspensions must be both raised by the same amount.

    - Ezy lift kits raise the front and rear of the vehicle the same amount which maintain O.E rake and weight distribution which maintains O.E braking performance.


    There is no specific reference to strut spacers in VSB14, so we have treated them the same as blocks and made sure all other rules & ADRs have been adhered to.



    It should also be noted that VSB14 specifically states that Extended or adjustable shackle plates must not be used to raise vehicles on leaf spring suspensions.



    Ezy Lift kits effect ESC (Electronic Stability Control) no more or less than other suspension Lift kits, which are permitted as long as the lift is under 50mm.





    ADRs – Australian Design Rules - [LINK to the Third Edition Australian Design Rules]

    ADR rules apply to new vehicle manufactured in Australia or imported as new or second hand vehicle. The ADRs are national standards for vehicle safety.

    As our Ezy Lift kits are an aftermarket modification falling under VSB14, they do not fall under the ADRs but for your information we have reviewed it against the national standards.



    ADRs that apply to Lifting a vehicle

    7, 7/ Brake Hoses – All our Kits whether they be Ezy Lift or Suspension Lift have provision for Brake hose mount adapters to remove stresses on hoses and ABS cables.

    10x, 10/ Steering Column – No effect.

    12, 12/ Glare Reduction in Field of View - No effect.

    31, 31/…, 35x, Braking – Our Ezy lift kits raise the front and rear of the vehicle the same amount which maintains O.E rake and weight distribution which maintains O.E braking performance.

    43/ Vehicle Configuration and Dimensions (ground clearance) – Enhanced.
    Isuzu Dmax Front & Rear SuperPro Easy-Lift Kit TRC185lk
    $285.00
  • Holden Colorado RG Tdi - 2012-on Front & Rear SuperPro Easy-Lift Kit TRC185lk

    Holden Colorado RG Tdi - 2012-on / Isuzu D-Max MP Tdi 4x4 2012 on


    This kit will lift the vehicle approx. 45mm and retains the standard suspension.

    Kit contains:

    2 Front Strut Spacers
    2 Rear Raising Blocks
    4 U Bolts
    Hand Brake Bracket Mount Extension Kit
    To be used with standard height suspension only.

    Strongly recommend to fit longer travel shock absorbers on the rear.

    Want a Suspension Lift on your new 4WD Ute without the Price Tag?

    SuperPro Roll Control Ezy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Ute and retain the standard suspension.
    Each kit has been maliciously tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension.
    Everything that is required has been supplied in each Kit, including comprehensive fitting instructions to ensure the right outcome every time.




    The Legislation says...Yes, our spacer lift kits are legal

    The following only applies if our Ezy-Lift kits are fitted correctly to vehicles with standard suspension (following all instructions included in the kit).



    VSB14 - Vehicle Standards Bulletin 14 - [LINK]

    The controlling set of standards for vehicle modification is VSB14 , in particular for us, Section LS Tyres, Suspension & Steering Modifications.

    The Ezy-Lift kits fall into the category of Basic Modifications without Certification.

    Everything about our lift kits meet the criteria set down in this document.

    Suspension modification, (50mm maximum if no other modifications resulting in a change of vehicle height are performed.

    - Our Ezy Lift Kits do not exceed 50mm lift.

    When raising a vehicle at least two thirds of the original rebound travel must be maintained. The rebound must be limited by the same method as originally employed by the manufacturer. For example limit straps or shock absorber full extension.

    - Each Ezy Lift kit is specifically designed for each application and the lift is different across all applications to comply with this rule with the use of Blocks and Strut Spacers.
    Blocks used with leaf spring suspensions must be steel, aluminium or metal of equivalent strength and must be positively located to the axle spigot hole and spring centre-bolt.

    - Ezy Lift Kits are Aluminium construction with Steel spigots.
    Following the completion of modifications the vehicle attitude must remain as per original specifications – i.e. the original relationship between the front and rear suspension heights must not be changed and therefore the front and rear suspensions must be both raised by the same amount.

    - Ezy lift kits raise the front and rear of the vehicle the same amount which maintain O.E rake and weight distribution which maintains O.E braking performance.


    There is no specific reference to strut spacers in VSB14, so we have treated them the same as blocks and made sure all other rules & ADRs have been adhered to.



    It should also be noted that VSB14 specifically states that Extended or adjustable shackle plates must not be used to raise vehicles on leaf spring suspensions.



    Ezy Lift kits effect ESC (Electronic Stability Control) no more or less than other suspension Lift kits, which are permitted as long as the lift is under 50mm.





    ADRs – Australian Design Rules - [LINK to the Third Edition Australian Design Rules]

    ADR rules apply to new vehicle manufactured in Australia or imported as new or second hand vehicle. The ADRs are national standards for vehicle safety.

    As our Ezy Lift kits are an aftermarket modification falling under VSB14, they do not fall under the ADRs but for your information we have reviewed it against the national standards.



    ADRs that apply to Lifting a vehicle

    7, 7/ Brake Hoses – All our Kits whether they be Ezy Lift or Suspension Lift have provision for Brake hose mount adapters to remove stresses on hoses and ABS cables.

    10x, 10/ Steering Column – No effect.

    12, 12/ Glare Reduction in Field of View - No effect.

    31, 31/…, 35x, Braking – Our Ezy lift kits raise the front and rear of the vehicle the same amount which maintains O.E rake and weight distribution which maintains O.E braking performance.

    43/ Vehicle Configuration and Dimensions (ground clearance) – Enhanced.
    Holden Colorado RG Tdi - 2012-on Front & Rear SuperPro Easy-Lift Kit TRC185lk
    $285.00
  • Holden Colorado & Izusu Dmax 2012 - on SuperPro Easy-Lift Front Strut Spacer Kit

    To be used with standard height suspension only.
    This kit will lift the vehicle approx. 45mm and retains the standard suspension.
    Holden Colorado & Izusu Dmax 2012 - on SuperPro Easy-Lift Front Strut Spacer Kit
    $135.00
  • Ford Ranger PX 2011-on SuperPro Easy-Lift Rear Lift Kit


    SuperPro Easy-Lift Rear Lift Kit
    This Kit is a safe, legal alternative to Extended Shackles.
    To be used with standard height suspension only.
    This kit will lift the vehicle approx. 45mm and retains the standard suspension.
    Ford Ranger PX 2011-on SuperPro Easy-Lift Rear Lift Kit
    $185.00

Items 1 to 12 of 17 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction