PadlockPay securely withVisaMastercard

Falcon BF

Items 1 to 12 of 53 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
  • Ford Falcon BA BF FG Sedan - 2002-2007 Superpro Rear Blade Control Arm Kit

    TRC1012
    SuperPro has developed a complete replacement Blade arm assembly for Falcon and Territory to make it even easier to repair. As this new design incorporates the new Polyelast material and Hybrid design, it is critical for the Blade bushing to be perfectly ‘timed’ in the arm.
    Each arm and bushing has been assembled to this precise location to ensure the maximum results from this new and innovative product.

    The Ford Falcon & Territory Rear Blade Bushing has proven to be a big problem with severe durability, ride and handling problems. The Blade Arm Bushing essentially pushes the car forward and stops the car during braking. It sees extremely high loads in excess of 15kN.
    The original Ford Blade bush is soft in all directions, which is not good for performance and durability, now there is a far superior option.

    By utilising Polyelast® Hybrid technology in this application, SuperPro can:

    • Eliminate the acceleration lag due to soft bushes, resulting in a more responsive car, with better traction and a more positive braking feel.

    • Offer a progressive rate bushing, which for the end consumer can be summed up as a plush ride through the suburbs with a ‘sports performance’ experience at the wheel when you need it.

    • Deliver massive durability increase and superior value for money.

    • Promise no compromise in Noise, Vibration & Harshness.

    Available Now!

    TRC1012
    Rear Blade Control Arm Kit
    • Kit includes 2 Arms fitted with Polyelast Bushes
    Ford Falcon BA / BF Sedan - 2002-2007
    Ford Falcon FG Sedan - 2008-on
    Ford Fairlane BA / BF - 2003-2007
    Ford Territory SX & SY - 2004-2011
    Ford Territory SZ RWD & AWD - 05/2011-on

    Ford Falcon BA  BF FG  Sedan - 2002-2007 Superpro Rear Blade Control Arm Kit
    $365.00
  • FORD FALCON BA/BF 02-05 REAR UPPER CONTROL ARM-OUTER BUSHES

    FORD FALCON BA/BF 02-05 REAR UPPER CONTROL ARM-OUTER BUSHES
    FORD FALCON BA/BF 02-05 REAR UPPER CONTROL ARM-OUTER BUSHES
    $95.00
  • Ford Falcon AU BA BF FG UTE Rear Superlow King Spring Leafs FOR-303SL

    FORD FALCON AU BA BF FG UTE REAR SUPER LOW KING SPRINGS LEAFS FOR-303SL

    General Product Information

    Height Options

    Many of our springs are designed to cross reference and give various height options on some vehicles. This information is too diversified and complicated to be printed and is often conditional. Please consult our technical staff if specialist height options are requested.

    VEHICLE RIDE HEIGHTS (centre hub to guard)
    An extensive library of vehicle ride heights is being compiled and this information is available to all customers.

    Car Coils

    Please note: The following height classifications are a generalization only. Degree of lowering can vary between part numbers and vehicles. Spring design i.e. spring rate and vehicle height is relative to market demand. If exacting measurements are required for vehicle ride heights please contact King Springs.
    ü Front Low: Lowers vehicle approximately 30mm below standard.
    ü Front STD: Standard Height.
    ü Front Raised: Raises vehicle approximately 20mm above standard (recommended for bull bar, country driving or whenever increased ground clearance is desired).
    ü Rear Low: Lowers vehicle approximately 30mm below standard.
    ü Rear STD +:Standard height to 20mm raised.
    ü Rear Raised: Raises vehicle approximately 30-40mm above standard (recommended for excessive towing, load-carrying or LPG tank etc)

    NOTE: Super Low coils are generally 40-50 below standard.
    Ford Falcon AU BA BF FG UTE  Rear Superlow King Spring Leafs FOR-303SL
    $850.00
  • FORD FALCON BA BF KONI FRONT ADJUSTABLE STRUTS

    FORD FALCON BA BF KONI FRONT ADJUSTABLE STRUTS

    KONI shocks include these exceptional performance features:
    • Owner adjustable valving for wear compensation and owner choice.
    • Adjustable over low and high speed damping ranges for overall smooth handling.
    • 100% dynamometer tested for complete quality control.
    • Many are serviceable.


    • Piston rod tolerance of plus or minus 5/1000mm and made of high carbon steel.
    • Guide 100% pearlite structure and matched to piston rod within 4/100 to 5/100mm.
    • Piston is precision ground cast iron and matched within 4/100-5/100mm to the cylinder.
    • Chrome plating of piston rod is induction hardened from specially tempered high quality steel, providing a flawless surface.
    • Inner cylinder is seamless and meets a straightness tolerance of 1/100 per meter of length.

    Over many years, KONI have acted as an OE supplier to the following famous manufacturers.

    • Ferrari
    • Porsche
    • Morgan
    • Lotus
    • Aston Martin
    • Ford
    • Maserati
    • Renault
    And more....
    FORD FALCON BA BF KONI FRONT ADJUSTABLE STRUTS
    $699.00

Items 1 to 12 of 53 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction