PadlockPay securely withVisaMastercard

Colorado RG

Items 1 to 12 of 22 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  • HOLDEN COLORADO RG 12- 2INCH-50MM BILSTEIN SUSPENSION LOAD-LIFT KIT - 300kg

    ARE YOU LOOKING TO RAISE THE HEIGHT OF YOUR HOLDEN COLORADO 2012-ON.

    NEEDING TO UPGRADE FROM STANDARD SUSPENSION TO A COMPLETE SUSPENSION RAISED PACKAGE WHILE STAYING WITHIN GOVERNMENT REGULATIONS. IF SO THIS 50MM PERFORMANCE-LIFT KIT IS THE SOLUTION YOUR LOOKING FOR. FEATURES

    ■ FRONT BILSTEIN 4X4 PREASSEMBLED SHOCK ABSORBERS WITH RAISED KING SPRINGS & NEW UPPER MOUNTS
    ■ REAR BILSTEIN 4X4 SHOCK ABSORBERS
    ■ RAISED REAR EFS LEAF SPRINGS
    ■ GREASEABLE SHACKLES
    ■ UBOLTS
    ■ SUPERPRO SUSPENSION LEAF SPRING BUSH KIT

    THIS 4X4 KIT THIS KIT DELIVERS A GREAT SOLUTION AT A FANTASIC PRICE, IT IS DESIGNED PRIMARILY FOR THE ENTHUSIAST 4X4 USER OR A CUSTOMER AFTER A SUSPENSION IMPROVEMENT/UPGRADE OVER ORIGINAL SUSPENSION SYSTEMS.

    THIS KIT COMES WITH A 1 YEAR 20000KM WARRANTY..
    HOLDEN COLORADO RG 12- 2INCH-50MM BILSTEIN SUSPENSION LOAD-LIFT KIT - 300kg
    $2,100.00
  • Holden Colorado RG 4WD 2008-2012 rear 2inch 50mm Extended Shackles

    If you are after more flex in your vehicles rear end, then Extended Shackles are an easy way to achieve it. Basically the extended shackle creates a
    greater sweeping arc of the shackle which in turn provides for more wheel travel and a nicer ride.
    Roadsafe Extended Shackles are engineered to the highest standard, with factory size Greasable Pins (to allow installation of factory bushings) and
    50mm extended plates. All Roadsafe extended shackles incorporate a stepped bolt design, ensuring that the shackles cannot be overtightened,
    resulting in deformation of the bushings.
    Giving 50mm more length than the factory shackle you will also see a lift of between approx. 30-40mm
    Sold in Pairs.

    Holden Colorado RG 4WD 2008-2012  rear 2inch 50mm  Extended Shackles
    $199.00
  • Holden Colorado RG 2012-on Superpro Greaseable Shackles & Bush kits

    Holden Colorado RG 2012-on Superpro Greaseable Shackles & Bush kits

    These Bushings are often overlooked when upgrading the suspension of a 4wd.Leaf spring bushings stabilise the movement of the rear axle , inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle .It alsocause the vehicle to "wander" all over the road and be unstable under heavy braking . This can be especially nocticeable carrying a load or towing a boat or caravan.

    The OE rubber stylebushes are designed to work at standard height with standard tyres and with standed loads.

    By fitting SuperPro Bushings and upgrading to a Greaseable Shackles , the rear end of your 4wd will handle just about anything you can throw at it !

    You need Superpro Greaseable Shackle & Leaf Spring Bushing Kits if -
    -The rubber bushings starts to show signs of wear .
    -Bigger wheels & Tyres are fitted .
    -The vehicle tows a trailer , boat or caravan.
    -The vehicle ride height is changed.
    -The vehicle carries more load .
    Holden Colorado RG 2012-on Superpro Greaseable Shackles & Bush kits
    $235.00
  • Holden Colorado RG 2012-on 4wd Front Coil Strut Spacers -35mm gives 50mm lift

    Part: CSSP9035
    Application: COIL STRUT SPACER 35mm
    Notes: This Spacer is 35mm high - and will give approx. 50-55mm lift over the axle


    Installation of Roadsafe Coil Strut Spacers is the ideal way of generating lift on vehicles with strut front ends. Coil Strut Spacers bolt to the top of the strut,and maintain full articulation of the front end. You can lift the front end to even out the nose dive appearance whilst still employing stock suspension.
    Holden Colorado RG 2012-on 4wd Front Coil Strut Spacers -35mm gives 50mm lift
    $180.00
  • Holden Colorado RG Front Diff Drop kit - ddcol02

    A Complete Bolt In Diff Drop Kit for RG Colorado & Isuzu D-Max (6/12-on)

    Is now available
    to suit these popular Strut Front end models with raised suspension. The Roadsafe
    DDCOL02, once fitted, will drop the inner CV Joint approx. 30mm, and has been
    designed to suit for lifts of 2-4". The kit comes complete with new Crossmember and alloy
    spacers. The Crossmember is manufactured from solid flame cut 15mm steel, with a
    recessed machined diff mounting boss, to avoid damage to the diff bolt head when
    offroading. The Crossmember is e-coated and powder coated black, for increased
    longevity and discreet fitment, and can be used with aftermarket or factory protection
    plates. The spacers are machined alloy, in black, and supplied complete with new
    mounting bolts - including a shorter bolt specific to D-Max installations only.
    Holden Colorado RG Front Diff Drop kit - ddcol02
    $399.00
  • Holden Colorado RG 4wd 2012-on Roadsafe Heavy Duty Recovery Points

    GENERAL FITTING INSTRUCTIONS & SAFETY GUIDELINES FOR USE OF TOW POINTS

    Tow Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts, and any additional, vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for yours & others personal safety.

    Each pair of Tow Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. It is the Tow Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owners discretion for fitment, ensuring that the chassis is adequately designed, constructed and/or rated to suit this application.

    It is recommended that Tow Points are fitted by a qualified mechanic with specialist 4WD knowledge, who has an understanding of your vehicle including weights carried, the style of Bull Bar, general usage etc. as in some circumstances these Tow Points may not be suit- able for your vehicle.

    These Tow Points have not been tested for lifting purposes & should not be used for lifting, the forces applied differ between lifting and straight line pull type recoveries.

    If a recovery is to be performed, it is imperative both recovery points are utilized, ideally with the use of a bridle strap. This will share the load through the front of your vehicle, giving increased strength and safety margins, the use of a bridle strap will also keep all com- ponents tethered in the case of a failure, reducing the risk of serious injury or death.

    Always INSPECT the Tow Points and shackles before each use. Do not use if there are visible signs of damage or wear (including cracking or elongation). Do not exceed the Working Load Limit (WLL) of the shackle or Tow Points. Always STAY A SAFE DISTANCE away from the recovery area – at least 1.5 times the length of the recovery strap. Incorrect use of recovery equipment can result in serious injury or death.

    Always ensure that adequate PREPARATION for the recovery, to minimise the strain on either vehicle, has been undertaken i.e. Digging, Rock placement etc. If you do not understand how to use this equipment safely or are uncomfortable with your abilities in the use of recovery equipment, please complete a course that specialises in four wheel driving & 4WD vehicle recovery.
    Holden Colorado RG 4wd 2012-on Roadsafe Heavy Duty Recovery Points
    $399.90
  • HOLDEN COLORADO RG7 STANDARD HEIGHT POLYAIR AIR BAGS - 11992

    Polyair Red Series bags are designed to fit inside the coil of a coil sprung vehicle to assist the spring in supporting whatever load is placed in the vehicle (within manufacturers recommended gross vehicle weight rating). They help in eliminating “bottoming out” and improve ride, handling and stability. The air adjustability allows you to tune the ride you want, whether you’re hauling, towing or riding light! Made with tough, long-lasting, moulded polyurethane.

    Features and benefits of the Polyair Red Series

    Add support to rear springs on many vehicles.
    Improves muscle car traction for drag racing.
    Improves ride and handling for full-size vans with front coils.
    Fits open coil springs, front or rear.
    Up to 450kg (1,000 lbs) of levelling capacity.*
    Air adjustable for the ride you want.
    Reduces roll, sway and “bottoming out.”
    Quick connecting easy-to-use engineered polymer air fittings.
    Tough moulded polyurethane construction.
    One year 20,000km limited warranty.
    HOLDEN COLORADO RG7 STANDARD HEIGHT POLYAIR AIR BAGS - 11992
    $295.00
  • HOLDEN COLORADO RG RAISED REAR BILSTEIN SHOCK ABSORBER

    BILSTEIN B6 OFFROAD
    Bilstein b6 offroad
    For off-road, 4 Wheel Drive performance.
    For off-road vehicles, we offer a version of the BILSTEIN B6 that is adapted to Australian 4 Wheel Drive requirements. The precise Bilstein damper settings reduce uncontrolled movements caused by the high 4 Wheel drive structure, they also improve the suspension’s load carrying capacity, as well as guaranteeing more vehicle control and, therefore, safer handling and better traction.

    The product benefits at a glance:

    Greater performance reserves and service life, even when towing or in off-road applications
    Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations
    Marked improvement in safety and performance without additional spring changes (standard springs can be used)
    BILSTEIN gas pressure technology
    BILSTEIN mono-tube/Upside-Down technology, made in Germany
    Road and track tested by BILSTEIN for fine tuning
    46mm piston, a winning formula with over 50 years of development
    HOLDEN COLORADO RG RAISED REAR BILSTEIN SHOCK ABSORBER
    $440.00
  • Holden Colorado RG Tdi - 2012-on Front & Rear SuperPro Easy-Lift Kit TRC185lk

    Holden Colorado RG Tdi - 2012-on / Isuzu D-Max MP Tdi 4x4 2012 on


    This kit will lift the vehicle approx. 45mm and retains the standard suspension.

    Kit contains:

    2 Front Strut Spacers
    2 Rear Raising Blocks
    4 U Bolts
    Hand Brake Bracket Mount Extension Kit
    To be used with standard height suspension only.

    Strongly recommend to fit longer travel shock absorbers on the rear.

    Want a Suspension Lift on your new 4WD Ute without the Price Tag?

    SuperPro Roll Control Ezy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Ute and retain the standard suspension.
    Each kit has been maliciously tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension.
    Everything that is required has been supplied in each Kit, including comprehensive fitting instructions to ensure the right outcome every time.




    The Legislation says...Yes, our spacer lift kits are legal

    The following only applies if our Ezy-Lift kits are fitted correctly to vehicles with standard suspension (following all instructions included in the kit).



    VSB14 - Vehicle Standards Bulletin 14 - [LINK]

    The controlling set of standards for vehicle modification is VSB14 , in particular for us, Section LS Tyres, Suspension & Steering Modifications.

    The Ezy-Lift kits fall into the category of Basic Modifications without Certification.

    Everything about our lift kits meet the criteria set down in this document.

    Suspension modification, (50mm maximum if no other modifications resulting in a change of vehicle height are performed.

    - Our Ezy Lift Kits do not exceed 50mm lift.

    When raising a vehicle at least two thirds of the original rebound travel must be maintained. The rebound must be limited by the same method as originally employed by the manufacturer. For example limit straps or shock absorber full extension.

    - Each Ezy Lift kit is specifically designed for each application and the lift is different across all applications to comply with this rule with the use of Blocks and Strut Spacers.
    Blocks used with leaf spring suspensions must be steel, aluminium or metal of equivalent strength and must be positively located to the axle spigot hole and spring centre-bolt.

    - Ezy Lift Kits are Aluminium construction with Steel spigots.
    Following the completion of modifications the vehicle attitude must remain as per original specifications – i.e. the original relationship between the front and rear suspension heights must not be changed and therefore the front and rear suspensions must be both raised by the same amount.

    - Ezy lift kits raise the front and rear of the vehicle the same amount which maintain O.E rake and weight distribution which maintains O.E braking performance.


    There is no specific reference to strut spacers in VSB14, so we have treated them the same as blocks and made sure all other rules & ADRs have been adhered to.



    It should also be noted that VSB14 specifically states that Extended or adjustable shackle plates must not be used to raise vehicles on leaf spring suspensions.



    Ezy Lift kits effect ESC (Electronic Stability Control) no more or less than other suspension Lift kits, which are permitted as long as the lift is under 50mm.





    ADRs – Australian Design Rules - [LINK to the Third Edition Australian Design Rules]

    ADR rules apply to new vehicle manufactured in Australia or imported as new or second hand vehicle. The ADRs are national standards for vehicle safety.

    As our Ezy Lift kits are an aftermarket modification falling under VSB14, they do not fall under the ADRs but for your information we have reviewed it against the national standards.



    ADRs that apply to Lifting a vehicle

    7, 7/ Brake Hoses – All our Kits whether they be Ezy Lift or Suspension Lift have provision for Brake hose mount adapters to remove stresses on hoses and ABS cables.

    10x, 10/ Steering Column – No effect.

    12, 12/ Glare Reduction in Field of View - No effect.

    31, 31/…, 35x, Braking – Our Ezy lift kits raise the front and rear of the vehicle the same amount which maintains O.E rake and weight distribution which maintains O.E braking performance.

    43/ Vehicle Configuration and Dimensions (ground clearance) – Enhanced.
    Holden Colorado RG Tdi - 2012-on Front & Rear SuperPro Easy-Lift Kit TRC185lk
    $285.00
  • Holden Colorado RG 2012- on 4WD Strut Spacer 2inch Suspension lift kit front

    Part: CSSP9025
    Application: COIL STRUT SPACER 25mm
    Notes: This Spacer is 25mm high - and will give approx. 40mm lift over the axle


    Installation of Roadsafe Coil Strut Spacers is the ideal way of generating lift on vehicles with strut front ends. Coil Strut Spacers bolt to the top of the strut,and maintain full articulation of the front end. You can lift the front end to even out the nose dive appearance whilst still employing stock suspension.
    Holden Colorado RG 2012- on  4WD Strut Spacer 2inch Suspension lift kit front
    $155.00
  • HOLDEN COLORADO RG 12- 2INCH-50MM BILSTEIN SUSPENSION LIFT KIT - COMFORT 150kg

    HOLDEN COLORADO 4X4 SUSPENSION LIFT KIT

    ARE YOU LOOKING TO RAISE THE HEIGHT OF YOUR HOLDEN COLORADO 2012-ON. NEEDING TO UPGRADE FROM STANDARD SUSPENSION TO A COMPLETE SUSPENSION RAISED PACKAGE WHILE STAYING WITHIN GOVERNMENT REGULATIONS. IF SO THIS 50MM PERFORMANCE-LIFT KIT IS THE SOLUTION YOUR LOOKING FOR. FEATURES

    ■ FRONT BILSTEIN 4X4 PREASSEMBLED SHOCK ABSORBERS WITH RAISED KING SPRINGS & NEW UPPER MOUNTS

    ■ REAR BILSTEIN 4X4 SHOCK ABSORBERS

    ■ RAISED REAR FORMULA LEAF SPRINGS

    ■ SWING SHACKLES

    ■ UBOLTS

    ■ SUPERPRO SUSPENSION LEAF SPRING BUSH KIT THIS 4X4 KIT THIS KIT DELIVERS A GREAT SOLUTION AT A FANTASIC PRICE, IT IS DESIGNED PRIMARILY FOR THE ENTHUSIAST 4X4 USER OR A CUSTOMER AFTER A SUSPENSION IMPROVEMENT/UPGRADE OVER ORIGINAL SUSPENSION SYSTEMS. IT WILL RAISE THE HEIGHT




    ■ 40MM (CWGH) AT 300KG OF LOAD CARRYING WEIGHT

    ■ STANDARD (NO BULLBAR/ALLOY BULL BAR)

    ■ HEAVY DUTY (STEEL BULL BAR) 4X4 KITS AVAILABLE

    ■ ENHANCEMENT KIT - RECEATIONAL 4X4 USER ■ PERFORMANCE KIT - ENTHUSIAST 4X4 USER

    ■ LOAD KIT - 4X4 USER OR TRADESPERSON CARRYING CONSTANT WEIGHT

    ■ LOAD KIT STEEL BAR AND WINCH - 4X4 USER CARRYING CONSTANT WEIGHT AND WITH EXTRA FRONT ACCESSORIES THIS KIT COMES WITH A 1 YEAR 20000KM WARRANTY..
    HOLDEN COLORADO RG 12- 2INCH-50MM BILSTEIN SUSPENSION LIFT KIT - COMFORT 150kg
    $1,890.00
  • HOLDEN COLORADO RG 12- 2INCH-50MM BILSTEIN SUSPENSION LIFT KIT - COMFORT 150kg

    HOLDEN COLORADO RG 12- 2INCH-50MM BILSTEIN SUSPENSION LIFT KIT - COMFORT 150kg
    HOLDEN COLORADO RG 12- 2INCH-50MM BILSTEIN SUSPENSION LIFT KIT - COMFORT 150kg
    $1,890.00

Items 1 to 12 of 22 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction