PadlockPay securely withVisaMastercard

D-Max

Items 1 to 12 of 70 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
  • HOLDEN COLORADO DMAX RODEO 2007 -2011 UPPER BALL JOINT


    VEHICLE REQUIRES TWO , THIS IS FOR A SINGLE UNIT
    SUITS LEFT AND RIGHT SIDES

    The ball joint basically serves as the pivot point between the tyre and the suspension. Roadsafe ball joints are manufactured to exacting standards and offer customers:

    An encapsulated design on the majority of ball joints – meaning there is no need to service/grease them for their lifetime
    Low friction and high performance
    Mirror finished ball stud for smooth operation and longer wear
    High quality CR (chloropene rubber) dust boot
    High static and dynamic load capabilities
    Rigorously tested


    HOLDEN COLORADO DMAX RODEO 2007 -2011 UPPER BALL JOINT
    $38.50
  • ISUZU DMAX 12-ON AIRBAG MAN RIDE RITE KIT (FIRESTONE) - RR4542DMAX

    ISUZU DMAX 12-ON AIRBAG MAN RIDE RITE KIT (FIRESTONE)

    ARE YOU CARRYING HEAVY LOADS, LOOKING FOR EXTRA SUPPORT WITHOUT MAKING YOUR RIDE STIFF AND HARSH WHEN NO LOAD IS ON THE VEHICLE, IF SO THEN THIS AIRBAGMAN RIDE RITE KIT COULD BE THE SOLUTION YOUR LOOKING FOR.

    FEATURES

    • FLEXIBILITY OF ADJUSTABLE HEIGHT TO LOAD LEVEL CONTROL ENSURING THE CORRECT DRIVING POSTION NO MATTER THE LOAD
    • NO DRILLING REQUIREMENT MAKING IT EASIER TO FIT.
    • BETTER TYRE WEAR
    • EVEN BRAKE WEAR
    • IMPROVED STEERING AND HANDLING CONTROL

    12 months / 20000klm warranty

    ISUZU DMAX 12-ON AIRBAG MAN RIDE RITE KIT (FIRESTONE) - RR4542DMAX
    $756.00
  • ISUZU D-MAX 4WD 2012-ON rear 2inch 50mm Extended Shackles

    If you are after more flex in your vehicles rear end, then Extended Shackles are an easy way to achieve it. Basically the extended shackle creates a
    greater sweeping arc of the shackle which in turn provides for more wheel travel and a nicer ride.

    Roadsafe Extended Shackles are engineered to the highest standard, with factory size Greasable Pins (to allow installation of factory bushings) and
    50mm extended plates. All Roadsafe extended shackles incorporate a stepped bolt design, ensuring that the shackles cannot be overtightened,
    resulting in deformation of the bushings.
    Giving 50mm more length than the factory shackle you will also see a lift of between approx. 30-40mm
    Sold in Pairs.

    ISUZU D-MAX 4WD 2012-ON  rear 2inch 50mm  Extended Shackles
    $195.00
  • ISUZU DMAX 12-ON RAISED REAR BILSTEIN SHOCK ABSORBER

    BILSTEIN B6 OFFROAD
    Bilstein b6 offroad
    For off-road, 4 Wheel Drive performance.
    For off-road vehicles, we offer a version of the BILSTEIN B6 that is adapted to Australian 4 Wheel Drive requirements. The precise Bilstein damper settings reduce uncontrolled movements caused by the high 4 Wheel drive structure, they also improve the suspension’s load carrying capacity, as well as guaranteeing more vehicle control and, therefore, safer handling and better traction.

    The product benefits at a glance:

    Greater performance reserves and service life, even when towing or in off-road applications
    Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations
    Marked improvement in safety and performance without additional spring changes (standard springs can be used)
    BILSTEIN gas pressure technology
    BILSTEIN mono-tube/Upside-Down technology, made in Germany
    Road and track tested by BILSTEIN for fine tuning
    46mm piston, a winning formula with over 50 years of development
    ISUZU DMAX 12-ON  RAISED REAR BILSTEIN SHOCK ABSORBER
    $440.00
  • ISUZU DMAX 12-ON 2INCH-50MM EFS SUSPENSION LOAD-LIFT KIT 300KG

    ISUZU DMAX 12-ON 2INCH-50MM EFS SUSPENSION LOAD-LIFT KIT 300KG
    ISUZU DMAX 12-ON 2INCH-50MM EFS SUSPENSION LOAD-LIFT KIT 300KG
    $1,920.00
  • Isuzu D-max 4WD 2012- ON STD Height Polyair Airbag Kit

    Handle big loads with full-time load support, improve safety and ride quality.

    Polyair Bellow kits are our heaviest-rated kits for hauling or towing heavy loads. They’re engineered and built with reinforced rubber bellows and end caps made of ultra-high strength Zytel(r) nylon, strong as steel, but it weighs less and is corrosion proof. It’s all held together with our exclusive Shur-Grip crimp for lasting strength.

    Features and benefits of Bellows System

    Brute strength our toughest add-on bags for your heaviest loads, right up to manufacturer recommended gross vehicle weight rating
    Rugged 2-ply fabric reinforced air springs are built like a tire.
    Fully adjustable, to keep your vehicle riding level and comfortable, whether loaded, towing or light, on any road conditions!
    Engineered to be easy to install in two hours or less.
    Many popular kits require no drilling!
    Up to 2200kg (5,000 lbs) of leveling capacity.*
    Air adjustable from 5 to 100 psi, for maximum comfort to maximum load support.
    Easy to install, with full illustrated instructions.
    Quick connecting easy-to-use engineered polymer air fittings.
    Tough, reinforced air bellows for long-lasting strength.

    Two year, 40,000 warranty.
    Isuzu D-max 4WD 2012- ON STD Height Polyair Airbag Kit
    $716.00
  • ISUZU DMAX 12-ON FRONT BILSTEIN STRUTS

    ISUZU DMAX 12-ON FRONT BILSTEIN STRUTS

    Performance you can feel. If you expect more damping power from your shock absorber – even under loads – but don’t want to opt for an all-out race solution, the BILSTEIN B6 Sport is ideal.

    The product benefits at a glance:

    Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads
    Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations
    Marked improvement in safety and performance without additional spring changes (standard springs can be used)
    BILSTEIN gas pressure technology
    BILSTEIN mono-tube/Upside-Down technology, made in Germany
    Road and track tested by BILSTEIN for fine tuning
    46mm piston, a winning formula with over 50 years of development
    ISUZU DMAX 12-ON FRONT BILSTEIN STRUTS
    $545.00
  • Isuzu D-max 4WD 2012- ON Raised Polyair Airbag Kit



    Handle big loads with full-time load support, improve safety and ride quality.

    Polyair Bellow kits are our heaviest-rated kits for hauling or towing heavy loads. They’re engineered and built with reinforced rubber bellows and end caps made of ultra-high strength Zytel(r) nylon, strong as steel, but it weighs less and is corrosion proof. It’s all held together with our exclusive Shur-Grip crimp for lasting strength.

    Features and benefits of Bellows System

    Brute strength our toughest add-on bags for your heaviest loads, right up to manufacturer recommended gross vehicle weight rating
    Rugged 2-ply fabric reinforced air springs are built like a tire.
    Fully adjustable, to keep your vehicle riding level and comfortable, whether loaded, towing or light, on any road conditions!
    Engineered to be easy to install in two hours or less.
    Many popular kits require no drilling!
    Up to 2200kg (5,000 lbs) of leveling capacity.*
    Air adjustable from 5 to 100 psi, for maximum comfort to maximum load support.
    Easy to install, with full illustrated instructions.
    Quick connecting easy-to-use engineered polymer air fittings.
    Tough, reinforced air bellows for long-lasting strength.
    TWO year warranty.
    Isuzu D-max 4WD 2012- ON Raised Polyair Airbag Kit
    $716.00
  • Isuzu Dmax 2012- on 4WD Strut Spacer 2inch Suspension lift kit front

    Part: CSSP9025
    Application: COIL STRUT SPACER 25mm
    Notes: This Spacer is 25mm high - and will give approx. 50-55mm lift over the axle




    Installation of Roadsafe Coil Strut Spacers is the ideal way of generating lift on vehicles with strut front ends. Coil Strut Spacers bolt to the top of the strut,and maintain full articulation of the front end. You can lift the front end to even out the nose dive appearance whilst still employing stock suspension.


    Isuzu Dmax 2012- on 4WD Strut Spacer 2inch Suspension lift kit front
    $150.00
  • HOLDEN COLORADO DMAX RODEO - 1ST BASH PLATE

    Roadsafe 4WD Protection Plates perfectly integrate with the vehicles key underbody designs with carefully positioned water dispersion and venting holes. The Roadsafe 4WD Protection Plates work to protect the key undercar components without compromising airflow, water disbursement or durability. Offroad driving exposes the vehicle to damage from a huge variety of obstacles found on the tracks, from rocks to logs, Roadsafe 4WD protection plates protect the vehicle undercarriage from the majority of bumps and scrapes against these obstacles. Roadsafe 4WD Protection Plates are especially useful in vehicles with IFS or general low ride height. Roadsafe 4WD Protection Plates are manufactured from 3mm steel, ensuring that while tough, the plates are not too heavy or rigid to contribute to structural damage to the vehicle in the event of a heavy impact. Basically, Roadsafe 4WD Protection Plates will act as a layer of armour underneath the vehicle!

    Enhanced offroad protection from rocks, logs, mud & debris.
    Improves aerodynamics of the vehicle
    No welding or drilling required
    Stylish & functional designs
    Precision laser cut 3mm steel

    Roadsafe 4WD Protection Plates are Australian designed & made. They are manufactured in 3mm steel – so are very strong. They are zinc coated for longevity, and laser cut for precision. Plates can be painted or powder coated over the zinc treatment by the customer if required (we do not paint!). All plates use the original bolt pattern – no drilling required. There are a couple of 3rd plates whereby self tappers are used to attach the plate to the crossmember. Where bolts/nuts are required for fitment, they are supplied with the kit. We recommend the use of threadlocker during the installation & tightening of all nuts/bolts. Easy bolt on installation. High tensile hardware. No welding or drilling required. Pressed ribs and folded reinforcements have been included to provide significant strength without adding unnecessary weight to the vehicle.

    Where possible oil change access, without plate removal, has been integrated into the plate design.

    Made in Australia, the Roadsafe 4WD Protection Plates range is second to none! Built tough to go the distance.
    HOLDEN COLORADO DMAX RODEO - 1ST BASH PLATE
    $195.00
  • ISUZU DMAX RC 2007-2011 - 1ST BASH PLATE

    Roadsafe 4WD Protection Plates perfectly integrate with the vehicles key underbody designs with carefully positioned water dispersion and venting holes. The Roadsafe 4WD Protection Plates work to protect the key undercar components without compromising airflow, water disbursement or durability. Offroad driving exposes the vehicle to damage from a huge variety of obstacles found on the tracks, from rocks to logs, Roadsafe 4WD protection plates protect the vehicle undercarriage from the majority of bumps and scrapes against these obstacles. Roadsafe 4WD Protection Plates are especially useful in vehicles with IFS or general low ride height. Roadsafe 4WD Protection Plates are manufactured from 3mm steel, ensuring that while tough, the plates are not too heavy or rigid to contribute to structural damage to the vehicle in the event of a heavy impact. Basically, Roadsafe 4WD Protection Plates will act as a layer of armour underneath the vehicle!

    Enhanced offroad protection from rocks, logs, mud & debris.
    Improves aerodynamics of the vehicle
    No welding or drilling required
    Stylish & functional designs
    Precision laser cut 3mm steel

    Roadsafe 4WD Protection Plates are Australian designed & made. They are manufactured in 3mm steel – so are very strong. They are zinc coated for longevity, and laser cut for precision. Plates can be painted or powder coated over the zinc treatment by the customer if required (we do not paint!). All plates use the original bolt pattern – no drilling required. There are a couple of 3rd plates whereby self tappers are used to attach the plate to the crossmember. Where bolts/nuts are required for fitment, they are supplied with the kit. We recommend the use of threadlocker during the installation & tightening of all nuts/bolts. Easy bolt on installation. High tensile hardware. No welding or drilling required. Pressed ribs and folded reinforcements have been included to provide significant strength without adding unnecessary weight to the vehicle.

    Where possible oil change access, without plate removal, has been integrated into the plate design.

    Made in Australia, the Roadsafe 4WD Protection Plates range is second to none! Built tough to go the distance.
    ISUZU DMAX RC 2007-2011 - 1ST BASH PLATE
    $195.00
  • HOLDEN COLORADO DMAX RODEO 2007 -2011 LOWER BALL JOINT

    VEHICLE REQUIRES TWO , THIS IS FOR A SINGLE UNIT
    SUITS LEFT AND RIGHT SIDES

    The ball joint basically serves as the pivot point between the tyre and the suspension. Roadsafe ball joints are manufactured to exacting standards and offer customers:

    An encapsulated design on the majority of ball joints – meaning there is no need to service/grease them for their lifetime
    Low friction and high performance
    Mirror finished ball stud for smooth operation and longer wear
    High quality CR (chloropene rubber) dust boot
    High static and dynamic load capabilities
    Rigorously tested
    HOLDEN COLORADO DMAX RODEO 2007 -2011  LOWER BALL JOINT
    $49.50

Items 1 to 12 of 70 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction