PadlockPay securely withVisaMastercard

Mu-x

11 Item(s)

per page

Set Descending Direction
  • Isuzu M-ux 4wd Rear king Springs

    Isuzu M-ux 4wd Rear king Springs

    LOOKING TO RAISE YOUR M-UX, , IF SO WE HAVE THE BEST SOLUTION ON THE MARKET. A REAR RAISED COILS THAT WILL LIFT THE VEHICLE 30-40mm (APPROX).

    FEATURES

    ■ KING SPRINGS ARE AUSTRALIA'S PREMIER COIL SPRING MANUFACTURE AND ARE THE ONLY COIL SPRINGS IN THE AUSTRALIAN MARKET USING X5K METAL.
    ■ THE BENEFITS OF USING X5K METAL ARE IT CAN DELIVERS LESS COIL BIND AT A MUCH REDUCED OVERALL WEIGHT KEEPING ITS DESIRED COMPRESSION RATE.
    ■ MANUFACTURED IN AUSTRALIA FOR AUSTRALIAN CONDITIONS


    WARRANTY

    ■ KING SPRINGS COME WITH A LIMITED LIFETIME WARRANTY


    PLEASE ENSURE THE DELIVERY ADDRESS WILL BE OCCUPIED DURING BUSINESS HOURS


    NOTE
    ■ THIS PRODUCT MAY REQUIRE EXTRA LENGTH SHOCK ABSORBERS, BRAKE LINES, AND CONTROL ARMS FOR THIS PRODUCT
    Isuzu M-ux 4wd Rear king Springs
    $196.00
  • Isuzu M-ux 4wd Front king Springs

    Isuzu M-ux 4wd Front King Springs

    LOOKING TO RAISE YOUR M-UX, , IF SO WE HAVE THE BEST SOLUTION ON THE MARKET. A FRONT RAISED COILS THAT WILL LIFT THE VEHICLE 30-40mm (APPROX).

    FEATURES

    ■ KING SPRINGS ARE AUSTRALIA'S PREMIER COIL SPRING MANUFACTURE AND ARE THE ONLY COIL SPRINGS IN THE AUSTRALIAN MARKET USING X5K METAL.
    ■ THE BENEFITS OF USING X5K METAL ARE IT CAN DELIVERS LESS COIL BIND AT A MUCH REDUCED OVERALL WEIGHT KEEPING ITS DESIRED COMPRESSION RATE.
    ■ MANUFACTURED IN AUSTRALIA FOR AUSTRALIAN CONDITIONS


    WARRANTY

    ■ KING SPRINGS COME WITH A LIMITED LIFETIME WARRANTY


    PLEASE ENSURE THE DELIVERY ADDRESS WILL BE OCCUPIED DURING BUSINESS HOURS


    NOTE
    ■ THIS PRODUCT MAY REQUIRE EXTRA LENGTH SHOCK ABSORBERS, BRAKE LINES, AND CONTROL ARMS FOR THIS PRODUCT
    Isuzu M-ux 4wd Front king Springs
    $196.00
  • Holden Colorado & Izusu Dmax 2012 - on SuperPro Easy-Lift Front Strut Spacer Kit

    To be used with standard height suspension only.
    This kit will lift the vehicle approx. 45mm and retains the standard suspension.
    Holden Colorado & Izusu Dmax 2012 - on SuperPro Easy-Lift Front Strut Spacer Kit
    $135.00
  • ISUZU MU-X RAISED HEIGHT POLYAIR AIR BAGS - 11092

    Polyair Red Series bags are designed to fit inside the coil of a coil sprung vehicle to assist the spring in supporting whatever load is placed in the vehicle (within manufacturers recommended gross vehicle weight rating). They help in eliminating “bottoming out” and improve ride, handling and stability. The air adjustability allows you to tune the ride you want, whether you’re hauling, towing or riding light! Made with tough, long-lasting, moulded polyurethane.

    Features and benefits of the Polyair Red Series

    Add support to rear springs on many vehicles.
    Improves muscle car traction for drag racing.
    Improves ride and handling for full-size vans with front coils.
    Fits open coil springs, front or rear.
    Up to 450kg (1,000 lbs) of levelling capacity.*
    Air adjustable for the ride you want.
    Reduces roll, sway and “bottoming out.”
    Quick connecting easy-to-use engineered polymer air fittings.
    Tough moulded polyurethane construction.
    One year 20,000km limited warranty.
    ISUZU MU-X RAISED HEIGHT POLYAIR AIR BAGS - 11092
    $295.00
  • ISUZU MU-X STANDARD HEIGHT POLYAIR AIR BAGS - 11992

    Polyair Red Series bags are designed to fit inside the coil of a coil sprung vehicle to assist the spring in supporting whatever load is placed in the vehicle (within manufacturers recommended gross vehicle weight rating). They help in eliminating “bottoming out” and improve ride, handling and stability. The air adjustability allows you to tune the ride you want, whether you’re hauling, towing or riding light! Made with tough, long-lasting, moulded polyurethane.

    Features and benefits of the Polyair Red Series

    Add support to rear springs on many vehicles.
    Improves muscle car traction for drag racing.
    Improves ride and handling for full-size vans with front coils.
    Fits open coil springs, front or rear.
    Up to 450kg (1,000 lbs) of levelling capacity.*
    Air adjustable for the ride you want.
    Reduces roll, sway and “bottoming out.”
    Quick connecting easy-to-use engineered polymer air fittings.
    Tough moulded polyurethane construction.
    One year 20,000km limited warranty.
    ISUZU MU-X STANDARD HEIGHT POLYAIR AIR BAGS - 11992
    $295.00
  • Isuzu D-Max 4wd 2012-on Roadsafe Heavy Duty Recovery Points

    GENERAL FITTING INSTRUCTIONS & SAFETY GUIDELINES FOR USE OF TOW POINTS

    Tow Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts, and any additional, vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for yours & others personal safety.

    Each pair of Tow Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. It is the Tow Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owners discretion for fitment, ensuring that the chassis is adequately designed, constructed and/or rated to suit this application.

    It is recommended that Tow Points are fitted by a qualified mechanic with specialist 4WD knowledge, who has an understanding of your vehicle including weights carried, the style of Bull Bar, general usage etc. as in some circumstances these Tow Points may not be suit- able for your vehicle.

    These Tow Points have not been tested for lifting purposes & should not be used for lifting, the forces applied differ between lifting and straight line pull type recoveries.

    If a recovery is to be performed, it is imperative both recovery points are utilized, ideally with the use of a bridle strap. This will share the load through the front of your vehicle, giving increased strength and safety margins, the use of a bridle strap will also keep all com- ponents tethered in the case of a failure, reducing the risk of serious injury or death.

    Always INSPECT the Tow Points and shackles before each use. Do not use if there are visible signs of damage or wear (including cracking or elongation). Do not exceed the Working Load Limit (WLL) of the shackle or Tow Points. Always STAY A SAFE DISTANCE away from the recovery area – at least 1.5 times the length of the recovery strap. Incorrect use of recovery equipment can result in serious injury or death.

    Always ensure that adequate PREPARATION for the recovery, to minimise the strain on either vehicle, has been undertaken i.e. Digging, Rock placement etc. If you do not understand how to use this equipment safely or are uncomfortable with your abilities in the use of recovery equipment, please complete a course that specialises in four wheel driving & 4WD vehicle recovery.
    Isuzu D-Max 4wd 2012-on Roadsafe Heavy Duty Recovery Points
    $399.90
  • Holden Colorado RG 4wd 2012-on Roadsafe Heavy Duty Recovery Points

    GENERAL FITTING INSTRUCTIONS & SAFETY GUIDELINES FOR USE OF TOW POINTS

    Tow Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts, and any additional, vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for yours & others personal safety.

    Each pair of Tow Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. It is the Tow Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owners discretion for fitment, ensuring that the chassis is adequately designed, constructed and/or rated to suit this application.

    It is recommended that Tow Points are fitted by a qualified mechanic with specialist 4WD knowledge, who has an understanding of your vehicle including weights carried, the style of Bull Bar, general usage etc. as in some circumstances these Tow Points may not be suit- able for your vehicle.

    These Tow Points have not been tested for lifting purposes & should not be used for lifting, the forces applied differ between lifting and straight line pull type recoveries.

    If a recovery is to be performed, it is imperative both recovery points are utilized, ideally with the use of a bridle strap. This will share the load through the front of your vehicle, giving increased strength and safety margins, the use of a bridle strap will also keep all com- ponents tethered in the case of a failure, reducing the risk of serious injury or death.

    Always INSPECT the Tow Points and shackles before each use. Do not use if there are visible signs of damage or wear (including cracking or elongation). Do not exceed the Working Load Limit (WLL) of the shackle or Tow Points. Always STAY A SAFE DISTANCE away from the recovery area – at least 1.5 times the length of the recovery strap. Incorrect use of recovery equipment can result in serious injury or death.

    Always ensure that adequate PREPARATION for the recovery, to minimise the strain on either vehicle, has been undertaken i.e. Digging, Rock placement etc. If you do not understand how to use this equipment safely or are uncomfortable with your abilities in the use of recovery equipment, please complete a course that specialises in four wheel driving & 4WD vehicle recovery.
    Holden Colorado RG 4wd 2012-on Roadsafe Heavy Duty Recovery Points
    $399.90
  • Isuzu Dmax 4wd Front Diff Drop kit - DDCOL02

    A Complete Bolt In Diff Drop Kit for Isuzu D-Max (6/12-on)

    Is now available
    to suit these popular Strut Front end models with raised suspension. The Roadsafe
    DDCOL02, once fitted, will drop the inner CV Joint approx. 30mm, and has been
    designed to suit for lifts of 2-4". The kit comes complete with new Crossmember and alloy
    spacers. The Crossmember is manufactured from solid flame cut 15mm steel, with a
    recessed machined diff mounting boss, to avoid damage to the diff bolt head when
    offroading. The Crossmember is e-coated and powder coated black, for increased
    longevity and discreet fitment, and can be used with aftermarket or factory protection
    plates. The spacers are machined alloy, in black, and supplied complete with new
    mounting bolts - including a shorter bolt specific to D-Max installations only.
    Isuzu Dmax 4wd Front Diff Drop kit - DDCOL02
    $399.00
  • Holden Colorado RG Front Diff Drop kit - ddcol02

    A Complete Bolt In Diff Drop Kit for RG Colorado & Isuzu D-Max (6/12-on)

    Is now available
    to suit these popular Strut Front end models with raised suspension. The Roadsafe
    DDCOL02, once fitted, will drop the inner CV Joint approx. 30mm, and has been
    designed to suit for lifts of 2-4". The kit comes complete with new Crossmember and alloy
    spacers. The Crossmember is manufactured from solid flame cut 15mm steel, with a
    recessed machined diff mounting boss, to avoid damage to the diff bolt head when
    offroading. The Crossmember is e-coated and powder coated black, for increased
    longevity and discreet fitment, and can be used with aftermarket or factory protection
    plates. The spacers are machined alloy, in black, and supplied complete with new
    mounting bolts - including a shorter bolt specific to D-Max installations only.
    Holden Colorado RG Front Diff Drop kit - ddcol02
    $399.00
  • Isuzu M-ux 4wd Heavy Duty Rear king Springs

    Isuzu M-ux 4wd Heavy Duty Rear king Springs

    LOOKING TO RAISE YOUR M-UX, , IF SO WE HAVE THE BEST SOLUTION ON THE MARKET. A REAR RAISED COILS THAT WILL LIFT THE VEHICLE 30-40mm (APPROX).

    FEATURES

    ■ KING SPRINGS ARE AUSTRALIA'S PREMIER COIL SPRING MANUFACTURE AND ARE THE ONLY COIL SPRINGS IN THE AUSTRALIAN MARKET USING X5K METAL.
    ■ THE BENEFITS OF USING X5K METAL ARE IT CAN DELIVERS LESS COIL BIND AT A MUCH REDUCED OVERALL WEIGHT KEEPING ITS DESIRED COMPRESSION RATE.
    ■ MANUFACTURED IN AUSTRALIA FOR AUSTRALIAN CONDITIONS


    WARRANTY

    ■ KING SPRINGS COME WITH A LIMITED LIFETIME WARRANTY


    PLEASE ENSURE THE DELIVERY ADDRESS WILL BE OCCUPIED DURING BUSINESS HOURS


    NOTE
    ■ THIS PRODUCT MAY REQUIRE EXTRA LENGTH SHOCK ABSORBERS, BRAKE LINES, AND CONTROL ARMS FOR THIS PRODUCT
    Isuzu M-ux 4wd Heavy Duty Rear king Springs
    $196.00
  • Superpro Control Arm Upper-Inner Bush Kit

    Control Arm Upper-Inner Bush Kit

    Axle alignment required after fitting
    Superpro Control Arm Upper-Inner Bush Kit
    $114.50

11 Item(s)

per page

Set Descending Direction