PadlockPay securely withVisaMastercard

Triton MN

Items 1 to 12 of 18 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  • MITSUBISHI TRITON 4X4 ML-MN 06-ON 40MM RAW SUSPENSION LOAD LIFT KIT


    ARE YOU LOOKING TO RAISE THE HEIGHT OF YOUR MITSUBISHI TRITON ML-MN 2006-ON. NEEDING TO UPGRADE FROM STANDARD SUSPENSION TO A LIFTED SUSPENSION PACKAGE WHILE STAYING WITHIN GOVERNMENT REGULATIONS. IF SO THIS LOAD LIFT KIT IS THE SOLUTION YOU COULD BE LOOKING FOR

    FEATURES

    ■ FRONT RAW NITRO MAX 4X4 SHOCK ABSORBERS
    ■ REAR RAW NITRO 4X4 SHOCK ABSORBERS
    ■ KING SPRINGS TO INCREASE THE HEIGHT IN THE FRONT
    ■ FORMULA REAR LEAF SPRINGS (HEAVY DUTY)
    (NOTE THESE SPRINGS CAN CAUSE DRIVELINE VIBRATION DUE TO INCREASE SHAFT ANGLE RECOMMEND CASTOR WEDGES FOR REAR AXLE)
    ■ UBOLTS
    ■ GREASEABLE SHACKLES
    ■ SUPERPRO BUSHING KIT


    THIS 4X4 KIT


    THIS KIT DELIVERS A GREAT SOLUTION AT A FANTASIC PRICE, IT IS DESIGNED PRIMARILY FOR A CUSTOMER AFTER A SUSPENSION IMPROVEMENT/UPGRADE OVER ORIGINAL SUSPENSION SYSTEMS.
    MITSUBISHI TRITON 4X4 ML-MN 06-ON 40MM RAW SUSPENSION LOAD LIFT KIT
    $1,490.00
  • Mitsubishi Triton ML, MN - 2006-2015 Strut Spacer Trim Kit TRC143flk


    Lifted Tritons often sit front down due to the higher lift in the rear, this can cause some slight handling and ABS issues.

    SuperPro suggests to use this Kit on a lifted vehicle to return the vehicle to the standard factory rake.

    Kit includes 2 x Strut Spacers and 2 x Shortened Bump Stops to increase droop travel


    Mitsubishi Triton ML, MN - 2006-2015 Strut Spacer Trim Kit TRC143flk
    $135.00
  • Mitsubishi Triton ml-mn 2006-on Superpro Greaseable Shackles & Bush kits

    Mitsubishi Triton ml-mn 2006-on Superpro Greaseable Shackles & Bush kits

    These Bushings are often overlooked when upgrading the suspension of a 4wd.Leaf spring bushings stabilise the movement of the rear axle , inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle .It alsocause the vehicle to "wander" all over the road and be unstable under heavy braking . This can be especially nocticeable carrying a load or towing a boat or caravan.

    The OE rubber stylebushes are designed to work at standard height with standard tyres and with standed loads.

    By fitting SuperPro Bushings and upgrading to a Greaseable Shackles , the rear end of your 4wd will handle just about anything you can throw at it !

    You need Superpro Greaseable Shackle & Leaf Spring Bushing Kits if -
    -The rubber bushings starts to show signs of wear .
    -Bigger wheels & Tyres are fitted .
    -The vehicle tows a trailer , boat or caravan.
    -The vehicle ride height is changed.
    -The vehicle carries more load .
    Mitsubishi Triton ml-mn 2006-on Superpro Greaseable Shackles & Bush kits
    $235.00
  • Mitsubishi Triton ML-MN 2inch 50mm Rear Extended Shackles

    If you are after more flex in your vehicles rear end, then Extended Shackles are an easy way to achieve it. Basically the extended shackle creates a
    greater sweeping arc of the shackle which in turn provides for more wheel travel and a nicer ride.

    Roadsafe Extended Shackles are engineered to the highest standard, with factory size Greasable Pins (to allow installation of factory bushings) and
    50mm extended plates. All Roadsafe extended shackles incorporate a stepped bolt design, ensuring that the shackles cannot be overtightened,
    resulting in deformation of the bushings.
    Giving 50mm more length than the factory shackle you will also see a lift of between approx. 30-40mm
    Sold in Pairs.

    Mitsubishi Triton ML-MN  2inch 50mm Rear  Extended Shackles
    $195.00
  • MITSUBISHI TRITON ML-MN 06-on 50MM BILSTEIN SUSPENSION COMFORT -LIFT KIT

    ARE YOU LOOKING TO RAISE THE HEIGHT OF YOUR MITSUBISHI TRITON ML-MN 2006-ON. NEEDING TO UPGRADE FROM STANDARD SUSPENSION TO A LIFTED SUSPENSION PACKAGE WHILE STAYING WITHIN GOVERNMENT REGULATIONS. IF SO THIS LOAD LIFT KIT IS THE SOLUTION YOU COULD BE LOOKING FOR

    FEATURES

    ■ FRONT BILSTEIN WITH KINGS COILS PREASSEMBLED WITH UPPER STRUT MOUNTS -50MM LIFT
    ■ REAR BILSTEIN 4X4 SHOCK ABSORBERS
    ■ EFS REAR LEAF SPRINGS (COMFORT)
    (NOTE THESE SPRINGS CAN CAUSE DRIVELINE VIBRATION DUE TO INCREASE SHAFT ANGLE RECOMMEND CASTOR WEDGES FOR REAR AXLE)
    ■ UBOLTS
    ■ GREASEABLE FRONT EYE PIN
    ■ SWING SHACKLES
    ■ SUPERPRO BUSHING KIT

    THIS 4X4 KIT

    THIS KIT DELIVERS A GREAT SOLUTION AT A FANTASIC PRICE, IT IS DESIGNED PRIMARILY FOR A CUSTOMER AFTER A SUSPENSION IMPROVEMENT/UPGRADE OVER ORIGINAL SUSPENSION SYSTEMS. IT WILL RAISE THE HEIGHT
    MITSUBISHI TRITON ML-MN 06-on 50MM BILSTEIN SUSPENSION COMFORT -LIFT KIT
    $1,795.00
  • MITSUBISHI TRITON 4X4 ML-MN 06-ON RAW SUSPENSION LIFT KIT

    MITSUBISHI TRITON 4X4 ML-MN 06-ON RAW / EFS SUSPENSION LIFT KIT
    MITSUBISHI TRITON 4X4 ML-MN 06-ON RAW SUSPENSION LIFT KIT
    $1,550.00
  • MITSUBISHI TRITON 4X4 ML-MN 06-ON 50MM FRT BILSTEIN READY STRUTS

    A QUALITY SOLUTION THAT'S READY AND EASY TO FIT

    ARE YOU LOOKING TO RAISE UP, LEVEL OUT OR JUST REPLACE THE SUSPENSION IN THE FRONT OF MITSUBISHI TRITON. READY STRUTS ARE AVAILABLE IN VARIOUS SPRING RATES AND HEIGHTS, MADE WITH HIGH QUALITY COMPONENT BRANDS – BILSTEIN STRUTS, KING SPRINGS, NEW UPPER MOUNTS WITH SUPERPRO BUSHES


    READY STRUT DELIVERS:

    ■ DIRECT REPLACEMENT - JUST BOLT IN FOR FRONT RAISED SUSPENSION SOLUTIONS
    ■ WE'VE DONE THE WORK - NO SPRING COMPRESSOR NEEDED
    ■ AVAILABLE IN BILSTEIN & RAW STRUTS - SPRING RATE OPTIONS - RIDE HEIGHT OPTIONS


    YOU RECEIVE

    ■ BILSTEIN 4X4 SHOCK ABSORBER (0-40MM SUSPENSION)
    ■ KING SPRINGS (OPTION AVAILABLE SEE BELOW)
    ■ NEW UPPER STRUT MOUNTS - INCLUDING SUPERPRO BUSHES

    FRONT SPRING RATE OPTIONS

    ■ STANDARD (COMFORT) - NOTHING OR LIGHT ALLOY BULLBAR
    ■ HEAVY DUTY - STEEL BULLBAR OR ALLOY BULLBAR & ACCESSORIES
    MITSUBISHI TRITON 4X4 ML-MN 06-ON 50MM FRT BILSTEIN READY STRUTS
    $880.00
  • Mitsubishi Triton ML, MN - 2006-2015 Shortened Bump Stops

    SUPERPRO SUSPENSION BUSHINGS
    THE SPECIALLY BLENDED POLYURETHANE USED IN SUPERPRO PRODUCTS HAS SPECIFIC MECHANICAL PROPERTIES THAT MAKE IT EXTREMELY SUCCESSFUL IN ITS APPLICATIONS

    FEATURES
    - EXTREME RESISTANCE TO ABRASION
    - LOW COMPRESSION SET
    - HIGH TEAR STRENGTH
    - RESISTANCE TO OILS AND SOLVENTS

    THE ABOVE FEATURES MAKES SUPERPRO IDEAL IN AUTOMOTIVE APPLICATIONS. THESE PROPERTIES LEAD TO A RESILIENT PRODUCT THAT IS HIGHLY VERSATILE IN ITS VARIOUS APPLICATIONS.

    WARRANTY - 3 YEAR 60000KM WARRANTY
    Mitsubishi Triton ML, MN - 2006-2015 Shortened Bump Stops
    $95.50

Items 1 to 12 of 18 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction