PadlockPay securely withVisaMastercard

GU

Items 1 to 12 of 44 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Set Descending Direction
  • SUPERIOR ENGINEERING NISSAN PATROL GQ-GU Rear Coil Tower Brace Kit - bolt on

    Coil Tower Brace Kit for Nissan Patrol - bolt on (Ute and body lifted Wagon)

    The Superior Engineering Chassis Tower Brace stops the rear coil tower from bending and tearing from the chassis, correcting a weak point in GU and GQ Nissan Patrol suspension design.

    Designed for the Ute style and Wagon with a body lift.

    The coil tower brace is pressed up with 8mm steel and comes with all the necessary bolts. Also comes with a Polyurethane anti-shaffing brake line plate to protect the brake lines and fittings.

    This is a brace kit to suit Nissan patrols. Designed to be 100% bolt on with all bolts included. Simply bolts on top of the towers.

    Wagons need a 2 inch body lift to allow for clearance.

    Note: Some vehicles may require exhaust modifications to fit this brace. Also due to placement of brakelines on some vehicles, lines may need to be carefully bent for clearance.
    SUPERIOR ENGINEERING NISSAN PATROL GQ-GU Rear Coil Tower Brace Kit  - bolt on
    $195.00
  • Nissan Patrol GQ - GU Standard Height Rear Polyair Airbag Kit - 95097


    Polyair Red Series bags are designed to fit inside the coil of a coil sprung vehicle to assist the spring in supporting whatever load is placed in the vehicle (within manufacturers recommended gross vehicle weight rating). They help in eliminating “bottoming out” and improve ride, handling and stability. The air adjustability allows you to tune the ride you want, whether you’re hauling, towing or riding light! Made with tough, long-lasting, moulded polyurethane.

    Features and benefits of the Polyair Red Series

    red1

    Add support to rear springs on many vehicles.
    Improves muscle car traction for drag racing.
    Improves ride and handling for full-size vans with front coils.
    Fits open coil springs, front or rear.
    Up to 450kg (1,000 lbs) of levelling capacity.*
    Air adjustable for the ride you want.
    Reduces roll, sway and “bottoming out.”
    Quick connecting easy-to-use engineered polymer air fittings.
    Tough moulded polyurethane construction.
    One year 20,000km limited warranty.
    Nissan Patrol GQ - GU Standard Height Rear Polyair Airbag Kit - 95097
    $345.00
  • Nissan Patrol GQ - GU Raised Rear Polyair Airbag Kit



    Polyair Red Series bags are designed to fit inside the coil of a coil sprung vehicle to assist the spring in supporting whatever load is placed in the vehicle (within manufacturers recommended gross vehicle weight rating). They help in eliminating “bottoming out” and improve ride, handling and stability. The air adjustability allows you to tune the ride you want, whether you’re hauling, towing or riding light! Made with tough, long-lasting, moulded polyurethane.

    Features and benefits of the Polyair Red Series

    Add support to rear springs on many vehicles.
    Improves muscle car traction for drag racing.
    Improves ride and handling for full-size vans with front coils.
    Fits open coil springs, front or rear.
    Up to 450kg (1,000 lbs) of levelling capacity.*
    Air adjustable for the ride you want.
    Reduces roll, sway and “bottoming out.”
    Quick connecting easy-to-use engineered polymer air fittings.
    Tough moulded polyurethane construction.
    One year 20,000km limited warranty.
    Nissan Patrol GQ - GU Raised Rear Polyair Airbag Kit
    $345.00
  • NISSAN PATROL GU WAGON FRONT & REAR BILSTEIN SHOCK ABSORBERS

    NISSAN PATROL GU WAGON FRONT & REAR BILSTEIN SHOCK ABSORBERS


    Performance you can feel. If you expect more damping power from your shock absorber – even under loads – but don’t want to opt for an all-out race solution, the BILSTEIN B6 Sport is ideal.

    The product benefits at a glance:

    Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads
    Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations
    Marked improvement in safety and performance without additional spring changes (standard springs can be used)
    BILSTEIN gas pressure technology
    BILSTEIN mono-tube/Upside-Down technology, made in Germany
    Road and track tested by BILSTEIN for fine tuning
    46mm piston, a winning formula with over 50 years of development
    NISSAN PATROL GU WAGON FRONT & REAR BILSTEIN  SHOCK ABSORBERS
    $880.00
  • Nissan Patrol Cab Chassis GU 97-06 Comfort Raised Front AND Rear King Springs

    NISSAN PATROL CAB CHASSIS GU 97-06 COMFORT RAISED FRONT AND REAR KING SPRINGS

    General Product Information

    Height Options

    Many of our springs are designed to cross reference and give various height options on some vehicles. This information is too diversified and complicated to be printed and is often conditional. Please consult our technical staff if specialist height options are requested.

    VEHICLE RIDE HEIGHTS (centre hub to guard)
    An extensive library of vehicle ride heights is being compiled and this information is available to all customers.

    Car Coils

    Please note: The following height classifications are a generalization only. Degree of lowering can vary between part numbers and vehicles. Spring design i.e. spring rate and vehicle height is relative to market demand. If exacting measurements are required for vehicle ride heights please contact King Springs.
    ü Front Low: Lowers vehicle approximately 30mm below standard.
    ü Front STD: Standard Height.
    ü Front Raised: Raises vehicle approximately 20mm above standard (recommended for bull bar, country driving or whenever increased ground clearance is desired).
    ü Rear Low: Lowers vehicle approximately 30mm below standard.
    ü Rear STD +:Standard height to 20mm raised.
    ü Rear Raised: Raises vehicle approximately 30-40mm above standard (recommended for excessive towing, load-carrying or LPG tank etc)

    NOTE: Super Low coils are generally 40-50 below standard.
    Nissan Patrol Cab Chassis GU 97-06 Comfort Raised Front AND Rear King Springs
    $400.00
  • NISSAN PATROL GU Y61 Raised 50-200mm 8/04-06 Lower Trailing Arms- extended

    NISSAN PATROL GU Y61 Raised 50-200mm 8/04-06 Lower Trailing Arms

    Part: TANP11B
    Application: TRAILING ARM REAR LOWER - LH - 11mm EXTENDED
    Notes: 11mm extended over standard - suit for SWB up to 2" lift, plus all the LWB's & Utes

    Roadsafe Rear Lower & Upper Trailing Arms are built tough, so when you bump them up against rocks & tough terrain, they won’t bend as much as the standard
    arms. You’ve got to really give the Roadsafe ones a decent smack to get the 5mm wall thickness to buckle in. We’re not claiming Roadsafe arms are infallible,
    there will always be a bloke who wants to hang his truck up by the lower rear arms with bending consequences, but for your average 4WD’er one set of Roadsafe
    arms should see you through the life of your truck.
    If your Rear Lower Trailing Arms have taken a knock, and resemble something a little bit bent, then it’s time for a new one! Your Rear Lower Trailing Arms on
    Patrols & Cruisers should not look bent!
    Manufactured to factory bush specifications & supplied complete with high flex rubber bushings
    NISSAN PATROL GU Y61 Raised 50-200mm 8/04-06 Lower Trailing Arms- extended
    $280.00
  • NISSAN PATROL GU Y61 Raised 50-200mm 8/04-06 Lower Trailing Arms- 16mm extended

    NISSAN PATROL GU Y61 Raised 50-200mm 8/04-06 Lower Trailing Arms

    sold as a pair
    Part: TANP16B
    Application: TRAILING ARM REAR LOWER - LH - 16mm EXTENDED
    Notes: 16mm extended over standard - suit for SWB with greater than 2" lift

    Roadsafe Rear Lower & Upper Trailing Arms are built tough, so when you bump them up against rocks & tough terrain, they won’t bend as much as the standard
    arms. You’ve got to really give the Roadsafe ones a decent smack to get the 5mm wall thickness to buckle in. We’re not claiming Roadsafe arms are infallible,
    there will always be a bloke who wants to hang his truck up by the lower rear arms with bending consequences, but for your average 4WD’er one set of Roadsafe
    arms should see you through the life of your truck.
    If your Rear Lower Trailing Arms have taken a knock, and resemble something a little bit bent, then it’s time for a new one! Your Rear Lower Trailing Arms on
    Patrols & Cruisers should not look bent!
    Manufactured to factory bush specifications & supplied complete with high flex rubber bushings
    NISSAN PATROL GU Y61 Raised 50-200mm 8/04-06 Lower Trailing Arms- 16mm extended
    $280.00
  • Nissan Patrol GQ/GU Roadsafe 4wd Front Diff Guard Protector

    Manufactured from a combination of 6 & 8mm thick plate, the Roadsafe 4WD Patrol
    Front Diff Guards provide that extra protection you need for your ring gear when off
    roading. Taking just 10 minutes to fit, the Diff Guard simply bolts on to the diff housing
    using hardware supplied. We got sick of the other Diff Guards rolling backwards after a
    knock, so have designed this one to bolt through the radius arm mount, and clamp the
    diff housing, so there are strong mounting points keeping the guard in place.
    Additionally, the shape has been refined to run as close as possible to the original diff
    housing, to allow clearance for aftermarket panhards.
    Nissan Patrol GQ/GU Roadsafe 4wd Front Diff Guard Protector
    $195.00

Items 1 to 12 of 44 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Set Descending Direction