PadlockPay securely withVisaMastercard

Hilux GGN25R

Items 1 to 12 of 19 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  • Toyota Hilux kun26 / GGN25R 4wd 2005 on Extended Upper Ball joints

    Toyota Hilux kun26 / GGN25R 4wd 2005 on Extended Upper Ball joints
    Toyota Hilux kun26 / GGN25R 4wd 2005 on Extended Upper Ball joints
    $165.00
  • TOYOTA HILUX KUN 26 / GGN25 4WD 05- COIL STRUT SPACERS & EXTENDED SHACKLES 50MM / 2 INCH

    Installation of Roadsafe Coil Strut Spacers is the ideal way of generating lift on vehicles with
    strut front ends. Coil Strut Spacers bolt to the top of the strut, and maintain full articulation
    of the front end. You can lift the front end to even out the nose dive appearance whilst still
    employing stock suspension.

    If you are after more flex in your vehicles rear end, then Extended Shackles are an easy way to achieve it. Basically the extended shackle creates a greater sweeping arc of the
    shackle which in turn provides for more wheel travel and a nicer ride. Roadsafe Extended Shackles are engineered to the highest standard, with factory size Greasable Pins (to allow
    installation of factory bushings) and 50mm extended plates. All Roadsafe extended shackles incorporate a stepped bolt design, ensuring that the shackles cannot be overtightened,
    resulting in deformation of the bushings.
    Roadsafe extended shackles incorporate a great design feature to protect the grease nipple against damage from rocks and debris that could be encountered in the installed position.
    Giving 50mm more length than the factory shackle you will also see a lift of between approx. 25-30mm (Depending upon application). Sold in Pairs.
    TOYOTA HILUX KUN 26 / GGN25 4WD 05- COIL STRUT SPACERS & EXTENDED SHACKLES 50MM / 2 INCH
    $350.00
  • Toyota Hilux 05-on KUN26/GGN25 FRONT COIL STRUT SPACERS 35MM

    35MM GIVES A LIFT OF 50MM

    Installation of Roadsafe Coil Strut Spacers is the ideal way of generating lift on vehicles with strut front ends. Coil Strut Spacers bolt to the top of the strut,
    and maintain full articulation of the front end. You can lift the front end to even out the nose dive appearance whilst still employing stock suspension.
    Toyota Hilux 05-on KUN26/GGN25 FRONT COIL STRUT SPACERS 35MM
    $180.00
  • Toyota Hilux KUNN26 / GGN25r 2005 on rear 2inch 50mm Extended Shackles

    If you are after more flex in your vehicles rear end, then Extended Shackles are an easy way to achieve it. Basically the extended shackle creates a
    greater sweeping arc of the shackle which in turn provides for more wheel travel and a nicer ride.

    Roadsafe Extended Shackles are engineered to the highest standard, with factory size Greasable Pins (to allow installation of factory bushings) and
    50mm extended plates. All Roadsafe extended shackles incorporate a stepped bolt design, ensuring that the shackles cannot be overtightened,
    resulting in deformation of the bushings.
    Giving 50mm more length than the factory shackle you will also see a lift of between approx. 30-40mm
    Sold in Pairs.

    Toyota Hilux KUNN26 / GGN25r 2005 on rear 2inch 50mm  Extended Shackles
    $195.00
  • TOYOTA HILUX 4X4 KUN26/GGN25 05-ON 2INCH-50MM RAW SUSPENSION LIFT KIT-300KG

    ARE YOU LOOKING TO RAISE THE HEIGHT OF YOUR TOYOTA HILUX 2005-ON KUN26/25. NEEDING TO UPGRADE FROM STANDARD SUSPENSION TO A RAISED SUSPENSION RAISED PACKAGE WHILE STAYING WITHIN GOVERNMENT REGULATIONS, IF SO THIS 50MM LIFT KIT IS THE SOLUTION YOUR LOOKING FOR.

    FEATURES

    ■ FRONT RAW PREDATOR READY STRUT - PREASSEMBLED WITH RAISED KING SPRINGS AND NEW TOP MOUNTS
    ■ REAR RAW NITRO 4X4 SHOCK ABSORBERS
    ■ FORMULA RAISED REAR LEAF SPRINGS-300KG
    ■ REAR SWING SHACKLES
    ■ REAR UBOLTS
    ■ SUPERPRO SUSPENSION REAR BUSH KIT
    TOYOTA HILUX 4X4 KUN26/GGN25 05-ON 2INCH-50MM RAW SUSPENSION LIFT KIT-300KG
    $1,650.00
  • TOYOTA HILUX KUN26 / GGN25R 2005- 4WD BASH PLATE

    TOYOTA HILUX KUN26 / GGN25R 2005- 4WD BASH PLATE

    Part: BP001-1

    Application: PROTECTION PLATE 1

    Notes: BASH PLATE - TOYOTA HILUX - 1ST PLATE (FITS WITH ARB BULL BAR AND MOST POPULAR BULL BARS. THE PLATE BOLTS TO THE CHASSIS USING ORIGNAL BOLT HOLES, SO NO DRILLING. WITH LATE 2012 MODELS THROUGH TO 2013 WITH STANDARD BAR THEY HAVE A PLASTIC INFILL THAT BOLT

    Some key points of the Roadsafe 4WD Protection Plates include:
    •Australian Designed & Manufactured

    •Enhanced offroad protection from rocks, logs, mud & debris.

    •Improves aerodynamics of the vehicle

    •No welding or drilling required = easy bolt on installation

    •Stylish & functional designs

    •Precision laser cut 3mm steel
    TOYOTA HILUX KUN26 / GGN25R 2005- 4WD BASH PLATE
    $175.00
  • Toyota Hilux KUN26 2005-on Front King Spring KTFR101


    Kings Springs exclusively use high quality, high stress X5K spring steel.

    This new generation steel allows King Springs to further improve many of their existing designs by reducing the amount of steel required in a spring, making it substantially lighter (by approximately 30%) and reducing the solid height therefore increasing travel. Being of particular benefit at all top levels of Motorsport, this new high stress material was introduced to the leading v8 super car teams (inc HRT, FPR & HSV) in early 2007 giving a hugely successful endorsement of its characteristics & proven durability.
    Although considerably expensive, King Springs have introduced this new high stress steel to their passenger car and 4wd designs which benefit the most at no extra cost to the consumer. As of now all King Springs manufactured coils are now in X5K material.
    Height Options
    Many of our springs are designed to cross reference and give various height options on some vehicles. This information is too diversified and complicated to be printed and is often conditional. Please consult our technical staff if specialist height options are requested.
    VEHICLE RIDE HEIGHTS (centre hub to guard)
    An extensive library of vehicle ride heights is being compiled and this information is available to all customers.
    Car Coils
    Please note: The following height classifications are a generalization only. Degree of lowering can vary between part numbers and vehicles. Spring design i.e. spring rate and vehicle height is relative to market demand. If exacting measurements are required for vehicle ride heights please contact King Springs.
    Front Low: Lowers vehicle approximately 30mm below standard.
    Front STD: Standard Height.
    Front Raised: Raises vehicle approximately 20mm above standard (recommended for bull bar, country driving or whenever increased ground clearance is desired).
    Rear Low: Lowers vehicle approximately 30mm below standard.
    Rear STD +:Standard height to 20mm raised.
    Rear Raised: Raises vehicle approximately 30-40mm above standard (recommended for excessive towing, load-carrying or LPG tank etc)
    NOTE: Super Low coils are generally 40-50 below standard.
    Toyota Hilux KUN26 2005-on Front King Spring KTFR101
    $199.00
  • Toyota Hilux KUN26 2005-on Comfort Front King Spring KTFR101T


    Kings Springs exclusively use high quality, high stress X5K spring steel.

    This new generation steel allows King Springs to further improve many of their existing designs by reducing the amount of steel required in a spring, making it substantially lighter (by approximately 30%) and reducing the solid height therefore increasing travel. Being of particular benefit at all top levels of Motorsport, this new high stress material was introduced to the leading v8 super car teams (inc HRT, FPR & HSV) in early 2007 giving a hugely successful endorsement of its characteristics & proven durability.
    Although considerably expensive, King Springs have introduced this new high stress steel to their passenger car and 4wd designs which benefit the most at no extra cost to the consumer. As of now all King Springs manufactured coils are now in X5K material.
    Height Options
    Many of our springs are designed to cross reference and give various height options on some vehicles. This information is too diversified and complicated to be printed and is often conditional. Please consult our technical staff if specialist height options are requested.
    VEHICLE RIDE HEIGHTS (centre hub to guard)
    An extensive library of vehicle ride heights is being compiled and this information is available to all customers.
    Car Coils
    Please note: The following height classifications are a generalization only. Degree of lowering can vary between part numbers and vehicles. Spring design i.e. spring rate and vehicle height is relative to market demand. If exacting measurements are required for vehicle ride heights please contact King Springs.
    Front Low: Lowers vehicle approximately 30mm below standard.
    Front STD: Standard Height.
    Front Raised: Raises vehicle approximately 20mm above standard (recommended for bull bar, country driving or whenever increased ground clearance is desired).
    Rear Low: Lowers vehicle approximately 30mm below standard.
    Rear STD +:Standard height to 20mm raised.
    Rear Raised: Raises vehicle approximately 30-40mm above standard (recommended for excessive towing, load-carrying or LPG tank etc)
    NOTE: Super Low coils are generally 40-50 below standard.
    Toyota Hilux KUN26 2005-on Comfort Front King Spring KTFR101T
    $199.00
  • Toyota Hilux GUN126R N80 Raised Front King Spring KTFR101



    Kings Springs exclusively use high quality, high stress X5K spring steel.

    This new generation steel allows King Springs to further improve many of their existing designs by reducing the amount of steel required in a spring, making it substantially lighter (by approximately 30%) and reducing the solid height therefore increasing travel. Being of particular benefit at all top levels of Motorsport, this new high stress material was introduced to the leading v8 super car teams (inc HRT, FPR & HSV) in early 2007 giving a hugely successful endorsement of its characteristics & proven durability.
    Although considerably expensive, King Springs have introduced this new high stress steel to their passenger car and 4wd designs which benefit the most at no extra cost to the consumer. As of now all King Springs manufactured coils are now in X5K material.
    Height Options
    Many of our springs are designed to cross reference and give various height options on some vehicles. This information is too diversified and complicated to be printed and is often conditional. Please consult our technical staff if specialist height options are requested.

    VEHICLE RIDE HEIGHTS (centre hub to guard)
    An extensive library of vehicle ride heights is being compiled and this information is available to all customers.
    Car Coils
    Please note: The following height classifications are a generalization only. Degree of lowering can vary between part numbers and vehicles. Spring design i.e. spring rate and vehicle height is relative to market demand. If exacting measurements are required for vehicle ride heights please contact King Springs.
    Front Low: Lowers vehicle approximately 30mm below standard.
    Front STD: Standard Height.
    Front Raised: Raises vehicle approximately 20mm above standard (recommended for bull bar, country driving or whenever increased ground clearance is desired).
    Rear Low: Lowers vehicle approximately 30mm below standard.
    Rear STD +:Standard height to 20mm raised.
    Rear Raised: Raises vehicle approximately 30-40mm above standard (recommended for excessive towing, load-carrying or LPG tank etc)
    NOTE: Super Low coils are generally 40-50 below standard.
    Toyota Hilux GUN126R N80 Raised Front King Spring KTFR101
    $199.00
  • Toyota Hilux Kun26r Rival Bonnet Struts

    Rival Bonnet Struts


    Drivetech 4x4 Bonnet Struts by Rival are a new addition to the Accessories range and
    are now available. These Bonnet Struts allow ease of opening and closing of a vehicles
    bonnet. Quite often it can be a task to open a heavy bonnet and keep it up if your vehicle
    is fitted with a bulbar, lights and aerials.
    This product eliminates any difficulty in this task and gives a clear path to any
    maintenance in the engine bay.

    Each kit comes with everything you need to install this product successfully.

    • High quality German made gas struts
    • Precisely designed for best fit possible
    • Made in Russia
    • No drill installation
    Toyota Hilux Kun26r Rival Bonnet Struts
    $139.00
  • SuperPro Polylast Strut Bush Kit spf2348k

    Spf2348k

    Utilises superior Polyelast material for massive increase in durability in all applications.

    Does Not Fit Koni Stuts

    Also suits
    LEXUS
    GX GX460 (J150) - 2009-on
    GX GX470 (J120) - 2001-2009
    TOYOTA
    FORTUNER GUN156 4WD - 10/2015-on
    HILUX 4WD - 2005-2015
    HILUX GGN, GUN 4WD - 2015-on
    LAND CRUISER PRADO 120 Series - 2002-2010
    LAND CRUISER PRADO 150 Series - 2010-on
    LAND CRUISER PRADO 90 Series - 1995-2002
    SuperPro Polylast Strut Bush Kit spf2348k
    $112.00
  • Toyota Hilux KUN26R N70 2inch-50mm 4x4 Formula 4x4 Extra Heavy Duty Lift Kit

    A RAISED SUSPENSION PACKAGE


    ■ FRONT FORMULA 4X4 SHOCK ABSORBERS PREASSEMBLED WITH RAISED EXTRA HEAVY DUTY KING SPRINGS AND NEW TOP MOUNTS (NO NEED FOR SPRING COMPRESSOR)

    ■ REAR FORMULA 4X4 SHOCK ABSORBERS

    ■ FORMULA RAISED REAR LEAF SPRINGS

    ■ REAR GREASEABLE SHACKLES

    ■ REAR UBOLTS

    ■ SUPERPRO SUSPENSION REAR BUSH KIT THIS 4X4 KIT
    Toyota Hilux KUN26R N70 2inch-50mm 4x4 Formula 4x4 Extra Heavy Duty Lift Kit
    $1,420.00

Items 1 to 12 of 19 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction