Please Choice Spring rate required
Sold as pairs
Kings Springs exclusively use high quality, high stress X5K spring steel.
This new generation steel allows King Springs to further improve many of their existing designs by reducing the amount of steel required in a spring, making it substantially lighter (by approximately 30%) and reducing the solid height therefore increasing travel. Being of particular benefit at all top levels of Motorsport, this new high stress material was introduced to the leading v8 super car teams (inc DJR/TP, FTR & NISSAN) in early 2007 giving a hugely successful endorsement of its characteristics & proven durability.
Although considerably expensive, King Springs have introduced this new high stress steel to their passenger car and 4wd designs which benefit the most at no extra cost to the consumer. As of now all King Springs manufactured coils are now in X5K material.
Many of our springs are designed to cross reference and give various height options on some vehicles. This information is too diversified and complicated to be printed and is often conditional. Please consult our technical staff if specialist height options are requested.
VEHICLE RIDE HEIGHTS (centre hub to guard)
An extensive library of vehicle ride heights is being compiled and this information is available to all customers.
Please note: The following height classifications are a generalization only. Degree of lowering can vary between part numbers and vehicles. Spring design i.e. spring rate and vehicle height is relative to market demand. If exacting measurements are required for vehicle ride heights please contact King Springs.
- Front Low: Lowers vehicle approximately 30mm below standard.
- Front STD: Standard Height.
- Front Raised: Raises vehicle approximately 20mm above standard (recommended for bull bar, country driving or whenever increased ground clearance is desired).
- Rear Low: Lowers vehicle approximately 30mm below standard.
- Rear STD +:Standard height to 20mm raised.
- Rear Raised: Raises vehicle approximately 30-40mm above standard (recommended for excessive towing, load-carrying or LPG tank etc)
NOTE: Super Low coils are generally 40-50 below standard.
Front and Rear STD: Raises vehicle approximately 10mm-20mm above standard.
- Front and Rear RAISED: Raises vehicle approximately 30mm-40mm above standard.
- Note: All heights mentioned are a generalisation only. Vehicle ride heights can vary, depending on:
- Life and/or age of vehicle
Accessories fitted to the vehicle
Factory options (Country Pack, S Pack etc.)
- Life and/or age of vehicle
Steering & Suspension Warehouse aims to ship out products ordered from our online store within 1-3 days of payment approval, however shipping times may vary depending on your location within Australia.
Payments are processed Monday to Friday (Public Holidays and closed days excluded).
Steering & Suspension Warehouse does not accept responsibility for goods lost, stolen or damaged in transit.
Shipping and Delivery Policy
We deliver products Australia wide using a variety of couriers including Australia Post, Star Track Express, Fastway Couriers, Couriers Please and Direct Freight Express.
Orders are dispatched within 1-3 business days and shipping times may vary depending on your location within Australia.
Freight contact details will be supplied once your order has shipped so you can track the progress of your order.
Steering & Suspension Warehouse ships goods Australia wide, however at this time we do NOT accept international orders through our website.
Please contact us on +61 07 4639 2824 or send us an email to enquire about your order.
Any order re-shipped due to being refused or undeliverable the first time will have the original freight charge added to the amount due for re-delivery to cover the costs of re-delivering. We will not be held responsible for paying for your package to get re-delivered.
Please ensure when you order a product that you are home to collect it or alternatively arrange to have it delivered to somewhere you know will be able to accept it.
Terms & Conditions
Terms & Conditions
The information in this site has been prepared in accordance with Australian law for the provision of goods and services in Australia. All information concerning Steering & Suspension Warehouse, Steering & Suspension Warehouse products and services, and other information is correct at the time of posting to the Steering & Suspension Warehouse website, but is subject to change without notice. Steering & Suspension Warehouse reserves the right at its sole discretion to change, modify, add or remove such information at any time.
This website is operated by Toowoomba Steering & Suspension trading as Steering & Suspension Warehouse.
All prices are in Australian dollars, and the Steering & Suspension Warehouse website will only accept payment in Australian dollars.
Goods purchased on the Steering & Suspension Warehouse internet site will only be sent to the purchaser’s shipping address once payment has been received and name and address details have been verified. Verification processes may include a search on the Sensis White Pages website, or through a phone call. If verification of name and address cannot be done to Steering & Suspension Warehouse's satisfaction, Steering & Suspension Warehouse will not release the goods and will instead issue a refund.
In the event of the purchase of goods as a gift, Steering & Suspension Warehouse will need verification of the recipient’s name and address as supplied on the order. The process as detailed above will apply to such purchases.
The Merchant name Steering & Suspension Warehouse will appear on your credit card statement.
Pricing of Products/Services
Steering & Suspension Warehouse reserves the right to change the prices of products or services, subject to change without notification.
All of our prices are in Australian dollars (AUD) and include GST (Goods and services tax) as of 1st July 2014. Product prices are regularly updated when price changes are received from our suppliers. If you find a cheaper advertised price somewhere else, email or phone us with the details of the supplier together with prices of the product required and we will endeavour to provide you with a more competitive price.
Please choose carefully. We do not normally give refunds if you simply change your mind or make a wrong decision. We will issue a refund or arrange a replacement only where goods are faulty or goods are damaged in transit. We will ask you to return the faulty or damaged goods before issuing a replacement product or refund. Where we determine that it's not a reasonable expense to post the items back to us, then we will ask for photographic evidence (particularly in relation to damaged freight) and we will arrange a replacement.
In the event of a refund being approved. All buyers must supply their bank details as follows.
1. Bank Name
2. Bank Account Name
3. Bank BSB Number
4. Bank Account Number
All refunds will be made by direct deposit bank transfer, unless otherwise agreed.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.